Skip to content
Dashboard

Automatic follow-ups

Set when your agent writes again to a lead who stays silent: the two situations, the delays, the number allowed by your plan, and how to switch them off.

A follow-up is a message your agent sends on its own when a lead stays silent. You choose the situations, the delays and what the agent should write. A lead gets two follow-ups at most.

Open Agents, click your agent, open the Prompt tab, then the third step, Follow-ups. Under the name of the step you read when the first follow-up leaves, for example After 1 day without a reply, or Off.

In the old dashboard, follow-ups were in the campaign panel. Campaigns are now called agents, and the Prompts page is now the Prompt tab of each agent.

Two settings live elsewhere: the time zone and Sundays are in the agent’s Settings tab, under Sending.

Follow-ups exist for agents that answer private messages. A group agent has no Follow-ups step. Changing them needs the Edit agents and their prompts permission.

The two situations: never replied, stopped replying

Section titled “The two situations: never replied, stopped replying”

Open Agents, click your agent, open the Prompt tab, then Follow-ups. Two cards describe when your agent follows up:

Card The situation
Never replied Your agent wrote first and its first message got no reply.
Stopped replying The lead replied, then the conversation stopped.

Each situation has its own switch, its own delays and its own texts. Each card reads Off, or for example On · 2 follow-ups. Click a card to see and edit its follow-ups.

A person who wrote to your agent first counts as having replied only once they have written again after the agent’s first answer.

  1. Open Agents, click your agent, open the Prompt tab, then Follow-ups.
  2. Click the card of the situation: Never replied or Stopped replying.
  3. Turn on its switch: Follow up with leads who never replied or Follow up with leads who stopped replying.
  4. In Follow-up 1, choose the delay and adjust the instructions.
  5. To send a second one, click Add a 2nd follow-up and choose its delay. This needs the Business or Scale plan.

Nothing needs to be published: follow-ups save themselves and apply right away. The badge at the top right reads Saved, live.

The two switches are separate. After turning one situation on, look at the other card and check that it reads what you want.

Delays and number of follow-ups you can set

Section titled “Delays and number of follow-ups you can set”

Open Agents, click your agent, open the Prompt tab, then Follow-ups, and click a situation.

Each follow-up has a delay: 1, 2, 3, 4, 6, 8 or 12 hours, or 1, 2, 3, 4, 5, 7 or 10 days.

  • Follow-up 1 is counted from your agent’s first message (Never replied) or from the last message of the conversation (Stopped replying).
  • Follow-up 2 is counted from follow-up 1.

The number of follow-ups depends on your plan:

Plan Follow-ups per lead
Free 0: the step is locked and shows Upgrade to Starter
Starter 1
Business 2
Scale 2

The count is per lead, not per situation: a lead who received its follow-ups gets no more, even if it replies and goes silent again later. See Subscription.

Open Agents, click your agent, open the Prompt tab, then Follow-ups. The text of Follow-up 1 and Follow-up 2 is a set of instructions, not a fixed message: your agent writes a new message each time.

  • For Never replied, it writes from its first message. For Stopped replying, it reads the conversation.
  • If the lead already wrote, the follow-up is in the lead’s language. Otherwise it follows your instructions.
  • Type / to insert a variable. Follow-ups accept four: Lead’s first name, Agent name, Your company and Language.
  • Rewrite asks Setty to rewrite the follow-up for you.

If your instructions tell the agent not to follow up in some cases and it writes nothing, nothing is sent and that lead gets no further follow-up.

To read a follow-up before any lead does, open the Test tab, go to the Follow-ups step and click Generate follow-up 1. See Test your agent.

A follow-up does not leave at the exact minute its delay ends. Your agent checks every 15 minutes which leads are due, and sends only when all of this is true:

  • it is between 9:00 and 19:00 in the agent’s follow-up time zone;
  • it is not Sunday, unless Follow-ups on Sundays is on;
  • it is not between 23:00 and 05:00 UTC, whatever the time zone.

A follow-up that falls due at night leaves at the next allowed moment. Follow-ups leave one by one, so a large batch spreads over the day, or over several days: see the next section.

A follow-up that could not leave within 72 hours after it fell due is dropped. This happens for example when the agent stayed paused or its number stayed disconnected for three days.

How many follow-ups a number sends per day

Section titled “How many follow-ups a number sends per day”

Follow-ups leave one by one from each WhatsApp number, at the pace of a person:

  • each check sends at most one follow-up per number, and two follow-ups from the same number are at least 9 minutes apart;
  • a number sends at most 30 follow-ups a day, all its agents together;
  • no new follow-up starts in the last 12 minutes of the sending hours;
  • every follow-up counts in the Messages sent total of the number for the day.

For WhatsApp, a follow-up to a lead who Never replied looks like writing to someone new, so these follow-ups are held back more. How many leave per day depends on how long the number has been on WhatSetter:

Age of the number on WhatSetter Never replied follow-ups per day
Less than 3 days 0
3 to 6 days 3
7 to 13 days 6
14 to 29 days 12
30 days or more 20

They also count in the New contacts limit of the number, with the first messages of your lists. They stop for 24 hours after the number is linked with a QR code, the first time or again, and while the number comes close to WhatsApp’s quota. Stopped replying follow-ups are limited to 8 a day while the number is less than 3 days old, then to 30. See How we protect your number.

Open Agents, click your agent, open the Settings tab, then Sending.

Setting What it does
Follow-up time zone Follow-ups leave between 9:00 and 19:00 of this time zone. It is Europe/Paris until you change it.
Follow-ups on Sundays Off: no follow-up leaves on Sunday. On: Sunday is a day like the others.

Each change applies right away, without a save button. On the Follow-ups step of the Prompt tab, a line under the switch recalls both settings and links back to this section.

Follow up only the leads that carry some labels

Section titled “Follow up only the leads that carry some labels”

When your agent has labels, each situation can follow up only some of its leads. See Agent labels.

  1. Open Agents, click your agent, open the Prompt tab, then Follow-ups.
  2. Click the situation: Never replied or Stopped replying.
  3. Under Who to follow up, click one or more labels, up to 6. To follow up everyone again, click All these leads.

The situation then follows up only the leads that carry one of the chosen labels, put by the agent or by hand. The choice saves on its own, and each situation has its own.

  • While the agent’s labels are off, only the labels put by hand count.
  • If a chosen label is deleted, that situation is paused: pick a label, or All these leads.
  • A lead without any of the labels is simply not followed up. Its stage does not change.

Follow-ups go out for an agent that is Active with a connected number, and only to leads in one of the two situations. A lead is never followed up when:

  • it is Qualified, Not interested, Stopped or Not contacted yet;
  • its Outcome is Won or Lost, or a meeting is booked with it, even a past one;
  • a person took over the conversation, or the AI is paused on it. See Take over a conversation;
  • it already received the number of follow-ups your plan and your settings allow;
  • its number is not on WhatsApp;
  • its number or its dial code is blocked. See Blocked numbers;
  • the situation is limited to some labels under Who to follow up, and the lead carries none of them;
  • the conversation is a WhatsApp group;
  • its last message never got an answer, for example because it wrote while the agent was paused. The lead is waiting for you, so a follow-up would be wrong: the agent answers when the lead writes again.

As soon as a lead replies, it leaves the Never replied situation. It enters Stopped replying only if it goes silent again.

Open Agents and check the agent first: a follow-up needs an agent that is Active and a number that is Connected. If both are fine, the lead may be excluded (see “Which leads get a follow-up”) or one of these applies:

  • The delay ended outside the sending hours, on a Sunday, or less than 15 minutes ago: the follow-up leaves at a later check.
  • WhatsApp limits the number, or the number was reconnected a moment ago: follow-ups wait and leave later. See How we protect your number.
  • The number reached its daily message limit: the follow-up waits for the next day.
  • Your plan’s messages for the month are used up. Each follow-up counts as one message. See Subscription.
  • The account is suspended for an unpaid invoice.
  • The situation is switched off, or Follow-up 2 was not added.
  • The situation is limited to some labels, and a chosen label was deleted: it is paused until you pick a label, or All these leads.
  1. Open Agents, click your agent, open the Prompt tab, then Follow-ups.
  2. Click Never replied and turn its switch off.
  3. Click Stopped replying and turn its switch off.

When both cards read Off, the step itself reads Off and no follow-up leaves. Your texts stay: you can prepare them and switch a situation on later.

To remove only the second follow-up of a situation, open the menu of Follow-up 2 and click Remove follow-up 2.

To stop the follow-ups of one lead only, take over its conversation, or set its stage to Not interested or Stopped in Leads.

Open Conversations and open a lead: a follow-up shows in the thread with the tag automatic follow-up after your agent’s name. With the default sort, a lead that was followed up moves back to the top of the list. See Conversations.

Open Leads, click Display, then Columns, and add Follow-ups. The column shows where each lead stands and how many follow-ups it received. See Leads & CRM.