# Analytics

> See what your agents produced over any period: new contacts, replies, qualified leads and meetings, and exactly how each figure and rate is counted.

Source: https://docs.whatsetter.com/dashboard/analytics/

**Analytics** is the page of your statistics: what all your agents produced
over a period you choose, and what became of the people they talked to. This
page explains each block and gives the exact definition of every figure and
rate.

## Open Analytics and find your way around

In the menu, under **Run**, click **Analytics**. The page covers all your
agents at once and opens on the last 30 days. It reads from top to bottom:

- **Results**: what happened during the period, in three figures.
- **What becomes of your new contacts**: the people contacted during the
  period, followed until today, as a funnel, a **Today** bar and a chart over
  time.
- **Worth a look** and **How we count**: two side cards, with what the
  figures bring out and a reminder of the definitions.
- **Compare**: the same people split by agent, by list or by origin.

The old A/B scoreboard and the group view are no longer on this page. A/B
tests are read in each agent, see [A/B variants](/dashboard/ab-variants/).
To recompute the figures, click the refresh button in the top bar.

## Choose a period

On the **Analytics** page, the period selector sits at the top right. Click
**7 d**, **30 d**, **90 d**, **12 mo** or **Since the start**. The page opens
on **30 d**.

- **7 d**, **30 d** and **90 d** are rolling windows: they go back 7, 30 or
  90 times 24 hours from now. They are not calendar weeks or months.
- **12 mo** is the last 365 days.
- **Since the start** begins at the first contact ever made in your
  workspace.

Every block of the page follows the period you pick. The choice is written in
the page address, so you can share the link, and it is remembered until you
close the browser tab. The same selector exists in each agent's **Results**
tab.

## Choose your own dates

1. On the **Analytics** page, click **Dates**, next to the period selector.
2. In **Choose your dates**, click the first day, then the last one. Both
   days are included.
3. Check the number of days shown at the bottom, then click **Apply**.

Days after today cannot be picked. To look at a single day, click it and
apply. Days start and end at midnight in the time zone of your browser.

The **Dates** button then shows the dates you chose. Click a period such as
**30 d** to go back to a rolling window. With your own dates, the figures stay
on the page: they cannot be opened in Leads.

## What the three Results figures count

At the top of the **Analytics** page, **Results** shows three figures, the
KPIs of the period. Each one counts leads by the date of one event, inside
the period.

| Figure | What is counted |
|---|---|
| **New contacts** | Leads whose first exchange happened during the period, whoever wrote first: your agent or the person. |
| **Newly qualified** | Leads who became qualified during the period, even if they were first contacted before it. |
| **First meetings** | Leads whose first meeting was booked during the period. Each lead counts once, even if the meeting was cancelled later. |

The three figures are independent. A lead contacted last month and qualified
this week is in **Newly qualified** but not in **New contacts**, so
**Newly qualified** can be higher than **New contacts**.

The [Overview](/dashboard/overview/) shows something else, in four steps
over 7, 30 or 90 days: of the people first contacted in the period, how many
are **In conversation**, **Qualified** and have **Meetings booked** today,
like the funnel of this page.

## Which leads are counted

On the **Analytics** page and on the Overview, every figure counts leads.
Four rules decide which ones.

- A lead is one person in conversation with one agent. A person followed by
  two of your agents counts once for each.
- A contact imported in a list becomes a lead on the day your agent sends it
  the first message, not on the day of the import.
- The people who write in private to a number that follows groups are not
  counted. Group agents are followed in **Groups**.
- Each member sees figures for the leads of their own scope. A member limited
  to their own leads gets the count of those leads and of the leads nobody
  holds.

## When a lead counts as qualified or as a meeting

On the **Analytics** page and on the Overview, qualification and meetings are
dated once per lead.

- A lead receives its qualification date the first time it becomes
  qualified: when your agent qualifies it in the conversation, when a member
  of your team sets its stage to **Qualified** by hand in **Leads**, or when
  it is set through the API. Later changes never replace that date.
- A lead receives its first meeting date the first time a meeting is booked
  for it through a connected calendar. A second meeting, a new time or a
  cancellation does not change that date.

So a lead is counted at most once in **Newly qualified** and once in
**First meetings**, whatever happens next. Meetings that do not go through a
connected calendar are not counted. See [Meetings](/dashboard/bookings/).

## Compare a period with the one before

On the **Analytics** page, each figure of **Results** shows a percentage and
a line such as "30 days before: 411".

- The period before has the same length and ends where yours starts: the 30
  days before the last 30 days, or the 12 days before the 12 days you chose.
- The percentage is the change between the two: current figure minus previous
  figure, divided by the previous figure.
- When the previous period counted nothing, no percentage is shown: there is
  nothing to compare with.
- **Since the start** has no period before, so it shows neither.

The small curve under each figure shows how it moved over the period. To
compare two periods of your choice, pick the dates of each one in turn with
**Dates**.

## Open the leads behind a figure

On the **Analytics** page, most numbers are links. Click one of the three
**Results** figures, a row of the **Today** bar, or a row of the **Origins**
table: **Leads** opens on the same period and the same people.

This works with **7 d**, **30 d**, **90 d** and **12 mo**. With dates you
chose or with **Since the start**, the numbers are not clickable: Leads
cannot show those windows yet.

In **Compare**, a row of the **Agents** table opens that agent's **Results**
tab on the same period, and a row of the **Lists** table opens the list.

The Analytics page has no export of its own. To get the rows, open the leads
behind a figure, then click **Export** in **Leads**.

## Why Leads does not show the same number

You clicked a row of the **Today** bar on the **Analytics** page and
**Leads** shows a different count. Both are right: they do not look at the
same thing.

- Analytics places each person at the furthest point they reached. A person
  who booked a first meeting stays in **Meeting booked**, even if the meeting
  was cancelled later. A person who was qualified stays in
  **Qualified, no meeting yet**, even if the conversation resumed afterwards.
- Leads filters on the stage each lead has right now. A cancelled meeting or
  a resumed conversation moves the lead to another stage there.

The three **Results** figures do not have this gap: they open Leads on the
same date and the same period.

## Read the funnel: what becomes of your new contacts

On the **Analytics** page, the block **What becomes of your new contacts**
takes the people first contacted during the period and follows them until
today. A past period keeps moving: someone contacted three weeks ago who
books a meeting today moves forward in it.

| Step | Who is in it |
|---|---|
| **New contacts** | Everyone first contacted during the period. |
| **In conversation** | Everyone except the people still without an answer: they replied to your agents, wrote to them first, or went further. |
| **Qualified** | People who reached qualification: qualified, or with a first meeting. |
| **Meeting booked** | People with a first meeting booked. |

Under each number, a percentage gives its share of the new contacts. Between
two steps, a second percentage gives the share of the step before. Hover a
step to read it in words.

When your agents wrote first to everyone, the second step is called
**Replied**. When everyone wrote first, that step is hidden.

## How the reply rate is calculated

On the **Analytics** page, the reply rate only concerns the people your
agents wrote to first. People who wrote first have no first message to reply
to, so they are left out.

Reply rate = people who replied ÷ people your agents wrote to first.

- Both numbers are taken among the new contacts of the period, as they stand
  today.
- A person has replied once they sent a message after your agent's first
  message.
- The rate is rounded to a whole percentage.

You read it in the **Reply rate** column of **Compare**, for all new contacts
and for each agent, list or origin. Hover the percentage to see the two
numbers behind it. An agent that only answers people who write first shows a
dash instead of a rate.

In the funnel, the **Replied** step also includes people who went further
without a recorded reply, for example a lead you marked as not interested by
hand.

## How the qualification rate and the meeting rate are calculated

On the **Analytics** page, these two rates use all the new contacts of the
period as their base, whoever wrote first.

- **Qualification rate** = new contacts who reached qualification ÷ new
  contacts. A person with a first meeting counts as having reached
  qualification.
- **Meeting rate** = new contacts with a first meeting booked ÷ new contacts.

Both follow the same people until today, so the rates of a recent period can
still go up. On a period of 7 days or less, the page reminds you:
**Recent contacts: these rates can still go up.**

The funnel shows the same shares under **Qualified** and **Meeting booked**,
plus the share of the step before: qualified among the people in
conversation, meetings among the qualified people.

Above 20,000 new contacts in the period, a note says that the rates cover the
20,000 most recent.

## What the conversion rate counts

The **Analytics** page has no figure called "conversion rate". Depending on
what you call a conversion, read one of these:

- From contact to reply: **Reply rate**.
- From contact to qualified lead: **Qualification rate**.
- From contact to meeting: **Meeting rate**.
- From one step to the next: the percentage shown between two steps of the
  funnel, for example the share of qualified people who booked a meeting.

All of them are computed on the new contacts of the period, followed until
today. The reply rate only counts the people your agents wrote to first. The
other two count every new contact.

## Why Newly qualified and Qualified are not the same number

On the **Analytics** page, **Newly qualified** (in **Results**) and
**Qualified** (in the funnel) answer two different questions.

- **Newly qualified** counts the qualifications that happened during the
  period. The lead may have been first contacted long before.
- **Qualified**, in the funnel, starts from the people first contacted during
  the period and counts those who have reached qualification since, including
  after the end of the period.

The same goes for **First meetings** and **Meeting booked**.

Example over the last 30 days: a lead contacted two months ago and qualified
yesterday adds 1 to **Newly qualified** and nothing to the funnel. A lead
contacted three weeks ago and qualified yesterday adds 1 to both.

## Who wrote first: your agents or the person

On the **Analytics** page, when the period has both kinds of contacts, a
selector appears above the funnel: **All**, **Your agents write first**,
**People write to your agents**. It filters the funnel, the **Today** bar and
the chart over time.

- A lead counts as "the person wrote first" when it came through a tracked
  link or wrote to your number on its own.
- It counts as "your agents wrote first" in every other case: a list, a form,
  the API, a lead added by hand, or an origin that is not known.

With **People write to your agents**, the funnel has no reply step: these
people are in conversation from their first message.

## What Today shows

On the **Analytics** page, under the funnel, the **Today** bar takes the new
contacts of the period and places each person once, at the furthest point
reached so far.

| Row | Who is in it |
|---|---|
| **Meeting booked** | A first meeting was booked, even if it was cancelled since. |
| **Qualified, no meeting yet** | Reached qualification, no first meeting booked. |
| **In conversation** | Replied, or wrote first. Excludes people who are qualified, not interested or stopped. |
| **Contacted, no reply yet** | Your agent wrote first, no answer, and the lead is not in the **Cold** stage. |
| **Cold: no reply** | Your agent wrote first, no answer, and the lead is in the **Cold** stage. |
| **Not interested** | In the **Not interested** stage, never qualified. |
| **Stopped: asked to stop** | In the **Stopped** stage, never qualified. |

Each row gives a count and its share of the new contacts. Rows at zero are
hidden. **Today** is also the label of the last bar of the chart below: the
day in progress.

## Read the chart over time: day by day, week by week, month by month

On the **Analytics** page, the chart under the **Today** bar spreads the new
contacts over time. Its title follows the length of the period:
**Day by day** up to 31 days, **Week by week** up to 92 days,
**Month by month** beyond. Weeks start on Monday.

Each bar groups people by the date of their first contact, then shows how far
they have gone since. A meeting booked today by someone first contacted on
the 3rd is added to the bar of the 3rd.

- **Contacts and conversations**: the new contacts and, inside the bar, those
  in conversation.
- **Qualified and meetings**: the qualified people and, inside the bar, those
  with a meeting. **Not interested** sits beside them.

Hover a bar to read its numbers. Click a label above the chart to hide or
show a series. On a rolling period, the last bar is hatched: it is the day,
week or month in progress, labelled **Today**, **This week** or
**This month**. The chart needs a period longer than one day.

## Compare your agents, your lists and your origins

At the bottom of the **Analytics** page, **Compare** splits the new contacts
of the period in a table. Choose **Agents**, **Lists** or **Origins** at the
top right of the block. A view is offered only when it has at least two rows.

The columns are **New contacts**, **Reply rate**, **Qualification rate** and
**Meeting rate**. The first row, **All new contacts**, is the total. Click a
column title to sort, click again to reverse the order.

Under an agent's name, a line says how it works: **Writes first**,
**Answers when people write**, or how many people it contacted and how many
wrote to it. It also says **Paused** or **Draft** when the agent is not
active, and **A/B test running** with a link to the test.

Agents with no new contact in the period are grouped under the table: click
**Show**. In **Lists**, the row **Not from a list** gathers the leads that
came another way.

## Why a rate is greyed out, shows a dash or says under 1%

On the **Analytics** page, three displays tell you how much to trust a rate.

- Greyed out: the rate rests on fewer than 20 people. With so few, one person
  moves it by more than 5 points. Hovering it shows
  **Fewer than 20 people: an unreliable rate.** When you sort **Compare** by
  a rate, these rows go to the bottom.
- A dash in **Reply rate**: all the people of that row wrote first, so there
  is no reply rate to compute.
- "under 1%": the rate is above zero and below 1%. All other rates are
  rounded to a whole percentage.

To get rates you can rely on, choose a longer period such as **90 d** or
**12 mo**: more people enter the base.

## The sentence shown above the funnel

On the **Analytics** page, one sentence can appear above the funnel. It names
the step where you lose the most people and links to the place to fix it.
Only the first rule that applies is shown.

1. Fewer than half of the people your agents wrote to replied, on at least 20
   people. Link: **Review the first message**.
2. At least 3 qualified people, no meeting, and no agent has booking turned
   on. Link: **Set up meetings**.
3. At least 3 qualified people, and fewer than a quarter of them booked a
   meeting. The link opens how the agent leads the conversation.
4. At least 20 people, at least half replied, but fewer than a third of those
   became qualified.
   Link: **Review the conversation**.

The link opens the agent that holds at least 70% of the people concerned.
When no agent does, it opens the list of your agents.

## The sentences of the Worth a look card

On the **Analytics** page, the **Worth a look** card lists up to three
findings that the figures of the period prove, each with a link to act on it.
The card is hidden when there is nothing to report.

- At least 20 people wrote to one of your agents and none is qualified yet.
  Link: **Review its conversation**.
- The people contacted by one agent reply much less than with your other
  agents: its reply rate is under 60% of theirs, on at least 30 people for
  that agent and 20 for the others. Link: **See its first message**.
- New contacts fell by half or more compared with the period before, which
  had at least 20. Link: **Open lists**.
- People who write on their own qualify at least twice as often as the people
  your agents contact, by at least 5 points, with 20 people or more in each
  group. Link: **See your tracked links**.

These are fixed rules, not generated text.

## See the results of a single agent

To see the figures of one agent, open **Agents**, click the agent, then the
**Results** tab. You can also click its row in **Compare** on the
**Analytics** page: the tab opens on the same period.

The tab shows the same blocks as Analytics, limited to that agent: the three
**Results** figures, the funnel, the **Today** bar and the chart over time,
with the same period selector and the same definitions.

When an A/B test is running on the agent, a line says so and **See the test**
opens it. The result of a test is read in the agent's **Prompt** tab, not in
Analytics. See [A/B variants](/dashboard/ab-variants/).

The link **Compare with your other agents** brings you back to the
**Compare** block.

## Where the figures of group agents are

The **Analytics** page does not include group agents. The people who write in
private to a number that follows groups are left out of its figures, and of
the figures of the Overview.

When your workspace has a group agent, a line at the bottom of the page says
**Group agents are followed in Groups.** Click **Open** to go there. See
[Groups](/dashboard/groups/).

The former group analytics view no longer exists: its address now opens the
**Groups** page.

## Why the page is empty

Two cases on the **Analytics** page.

- **Your first results will show up here**: nobody has been contacted in your
  workspace yet. Click **Send a list** to open **Lists**, or **See my agents**
  to open **Agents**. Figures appear once an agent has had a first exchange
  with someone.
- **No new contacts in this period yet.** The workspace has leads, but none
  was first contacted during the period you picked. Choose a longer period,
  for example **90 d** or **Since the start**.

If the page says **Couldn't load your analytics**, click **Try again**.

## Who can see Analytics

The **Analytics** entry of the menu and the page require the
**See analytics** permission. By default, the roles **Owner**, **Admin**,
**Editor** and **Viewer** have it. **Responder** does not.

Without the permission, the entry is not in the menu, and opening the address
shows **Access Denied**. The permission is given in **Team**. See
[Team & roles](/dashboard/team/).

Two things to know:

- Figures are computed inside each member's scope. A member limited to their
  own leads sees figures for those leads and for the leads nobody holds.
- An agent's **Results** tab does not need this permission: anyone who can
  open the agent can read it.

## Related

- [Overview](/dashboard/overview/)
- [Leads & CRM](/dashboard/leads/)
- [Agents](/dashboard/agents/)
- [A/B variants](/dashboard/ab-variants/)
